SNOWFLAKE CUSTOMS

Tuesday, June 19, 2012

Parts for your SHOVELHEAD

 Rocker covers for your Shovelhead cooming soon, these are my set for some R&D. I will put these on test use this summer but orders are welcome.
 These are NOT made in Taiwan, these are quality parts that are made in FINLAND.
For more information contact me: snowflakecustoms@gmail.com or +358(0)400 781884

 The studs will be changed out to turned bolts for these covers. Will be included to the set. 
 More to come on this engine, were these parts are going into.
Have you ever seen Reese Fish carbs? I will build a manifoild for these twin carbs.
How the outcome will be.... I realy dont know....more to come 

Esmeralda

 The handlebar is ready I just sparybombed it, I need to get this baby on the road...
 The seat is ready and mounted on the frame.
 The pipes are ready, mounted and painted flatblack. The "muffler" is made out of stainless I didnt have the energy to pollish it to a mirror finnish..... Fu*king bling bling won´t make you go any faster..
 I had to do it.......
 Spray bomb paint job dirt cheap.

Parts

I had a problem tightening my transmission with the original nuts and washers. My transmission plate is made out of 7000 series aluminium so I needed something beefy to get the jobb done.
These are available from SnowflakeCustoms@gmail.com and are made of tool grade steel.
They are four in a set.  

Monday, June 18, 2012

Esmeralda

 Here is a pic of my handlebar to my bike, I wanted to use the original clamp. So it needed to be cut this way and welded back.
 I like this style of handlebar so i made my own with a litle twist, I will use 22mm grips type motocross because I like them more than the fat ones that is originaly used. 
Here is a view of my shop outside, nice beats your office any day.
Painting my pipes been lazy taking pics but will take more tomorrow.....Some nice parts to come.
Stay tuned.....

Wednesday, June 13, 2012

Esmerald

 Ok, here the tank is ready and the pic is taken from beneath the tank so you can see the oil and gas lines.
 Here is another pic of the tank, I use a 20mm hose between the gas tanks i dont have a filler cap on this side just this hose and a big air hose to get the gas to this side when filling up on stops. There is nothing extra with the oil lines just your normal setup.
 The LOUD pipe is ready, and I like it. Just need to finnish the suport  for it. Othervise the bike is getting there just a lot of small parts to make............ This is my take on the chopper, light as possible good brakes a nice engine (I have a wilder one on the make....) with as much as the original parts as possible NO Taiwan Ted parts that every one can by of the shelf. 
Make or design your own parts! 
 The seat is also mounted on the bike no leather work on this one just spray bomb it.
Here you can se the hose between the tanks big and ugly but fits the part.