SNOWFLAKE CUSTOMS
Showing posts with label Work. Show all posts
Showing posts with label Work. Show all posts

Monday, September 8, 2014

Extraseat for suzuki.

Here is a extra seat I made for a yamasuki..... the leatherwork is done by Verhoomo pro.

Wednesday, February 26, 2014

1957 Panshovel

Got the 1957 ready for paint. Test fitted some parts and made the brackets for the seat and sear springs. And some minor welding and grinding before ground work and paint.

Tuesday, February 11, 2014

Service day att the machine shop.

After a busy time att the machine shop I hadn't have time to service the lathe and mill so thats made me busy for a couple of days. Will post pics tomorrow on the ink masters frame.

Monday, January 13, 2014

More monday fun with Atom parts.....

I also had to make breathers for the topend because I will use a different setup of carbs than the original, then again I cant find any ready made parts that I want so I have to make my own. You know then Yankee's use inches and I live in a metric world......

Monday fun with Atom parts

Making parts for Atom, had much problems with the rear brake so had to sleep over it....... then I got it. I have quite a few of HD disks that are almost new but to big in diameter for this bike. But when you have a mill and some good tools that's not a problem. Here you can se what I did to it. I needed to rework the spacer also. And find a new rear caliper. And fugure out if it will work...............

Friday, January 10, 2014

More of the sissy....

Here are some more pics of the sissy and some welding pics. I also mounted the rear fender. Made some new bungs for it and other small parts...

Monday, February 6, 2012

Seat

 Made a seat.
This one is made from an old tractor seat

Friday, November 11, 2011

These newer end, more Softail frame work

This chopper is made the same way, just with some different specs from the ones I made previous.
I have coming up, a Softail that is hardtailed and a shovel that is Softailed. And my personal bike I am making a leafspring front end on it and changing the pipes on the frame to a special sort of alloy this I hope will lithen the frame 40-45% and still make it stronger then the original frame.  

Monday, September 19, 2011

Mike the mekanic

Here is the bike before I opened the engine on it, its in my friends shop RIVERSIDE CYCLES in Porvoo Finland. The bike is ready fore paint, last mokup. We hope to get it ready for Petrol circus.

Friday, January 14, 2011

FBF Frame

This is a frame I am building it is a type of featherbed frame made to fit a shovelhead engine and rotary top transmission with the original closed chain primary, here is some closeups of the engine and transmission mounts on the frame.
Here you can se the frame and a litle bit off my frame jig.

More of the frame and the frame jig I will post some more pics as soon as I get more done on the frame.


Monday, November 8, 2010

Sportster 280

Some teasers of the bike, I will have the most metalwork ready by tomorrow then i will post more pics of the bike.
This was quite tricky........................needed to offset the front sproket to china.....

Looks wiiiiiiide


Tuesday, October 26, 2010

PanShovel 103"

GELLNER Stampt on the flywheele, if somebody knows anything about this please send me some information I would be grateful.
Billet parts in the right place, these are stamped STROKTEK, been trying to find any info on the net no sucsess.I got this engine used and the old owner didnt know anything about it, it was built in the USA. We had it running in the summer when I bought the bike. The engine ran like a raped ape....... but all the gaskets were blown.... tore down for repairs

Here are the parts ready for assembly, they are soda blasted and cleand up. No metal work for a few days. A lot of godies in this engine...... Hope to kick some TwinCams with this one.


Friday, October 22, 2010

New Project

The bike will be kick only so the primary cover needs to be chopt...... didnt fit anyway..
Otherwise the bike is ready for paint




I will post more pics when I get the bike from the painter.



New Project

I also made the oilbag and battery tray ready.


New Project

Got the dash ready today.


Thursday, October 21, 2010

New Project

Didnt like the the original dash so I have been working on something that works betterNot ready yet but geting there

New Project

Here is some detail pics of frame work, you can also se the battery tray in the oil tanl.


Frame work


The seat is made from an old tracktor seat that i found somewhere... not ewerything needs to be billet shit from taiwan.......