New Project

I have been working on this bike fore some days now, worked on the frame and the sheetmetal.

I had all the parts sodablasted, I will newer use anything else. The engine is copletly rebuilt same the tranny, also coming is a new built clutch with SFCustom made parts. I will post soon pic of the clutch

Steffis bike

Ive been working on steffis bike making some improvements

Lefa´s Bike

Paint work on the bike

Lefa´s Bike

Came out pretty nice.....

Fab work

Starting work on a Rob North type of frame for my friend. This with an twist, I am making it with an shovelhead engine and trans. Will keep on posting as I make some progress.

Fab work

Remember the softail frame that needed first aid? Got it ready with the frontend extended.

Fab work

A lot of drilling on this bike........

Fab work

Oilfilter braket

Lefas Bike

This came out nice.

Fraku´s bike

Nice,

The paint-jobb, with real dollars.

Lefa´s bike

Made the pipes.

Old saddle from a tractor

Close-up of details

The bike is starting to look good

The devil is in the details.....

Shop

My ride, "Esmeralda" made redy for this season.

Brackets, Parts

These are made with 8mm & 10mm holes 5mm thick

For pipes with 8mm & 10mm holes 5mm thick

These are made with 21mm hole 6mm thick

These are made with 21mm hole 6mm thick

The same 21mm hole and 6mm thick, all parts are 5€ / 1 piece
you can contact me snowflakecustoms@gmail.com
I have been busy chopping so Im still working on my home page.....

So have some patience..... its coming soon.....

Welding

I have welded some cracks on gearboxes, these are pics before machining.

Sportster 280

I have been busy on a Sportster wide wheel bike. I have changed the rear frame, oiltank and also made an new battery box underneath the svingarm. I have also changed the rear fender wider to fit the wheel. I am just puzzled at how I will get the fender mounted on the frame....

I will post pics when I´m ready with it.

Esmeralda

I have made some small improvements on the bike

XLH

I will post pictures when it is completely finished

Softail Frame

Frame that needs some first aid..........................

PTB

Low and mean, Weber carb and some postorder parts like the knucklehead valvecovers, I realy dont care for the post order parts but the knuck engine is wery hard to find and a new one is to expensive. I use new headders from V8 engines chevy or other make for the exhaust bends they are dirt cheap and you get all the different bends you want.

PTB

Also been making some progress on this bike, fitted the milled primary, new engine and tranny.
I needed to change the place for the oiltank it didnt fit with this gearbox and starter.

Milling

After I been milling this Taiwan Ted part for a while it starts to look like something. This is wery bad material to mill, like old coke cans. Buy cheap get shit, but you have to work with wath you got. I will also cut down the width of the primary belt, its now 3,25" wide with out side suportbearings I think it would look better with 1,5" wide belt. Will post pics as I get the parts done.

Chopping

Been working on my friends bike. I had an newer used Taiwan Ted primary that I cut up to make it fit the style of the bike.

Frame jig

Here is pic of the frame jig, this is an work in progress with the jig. It needs some remodeling again, this is things you learn as you go on.

Frame

Now its looking better, changed the part that was cracked and rewelded the whole neck. I welded the whole neck in the frame-jig to awoid any warping of the neck during welding.